Bowl fill head parts

Below is a list of the gaskets, seals and bearings. The bearing I found is a sealed bearing - and should last longer than an open bearing.

If you want to get the o-rings your self - I would recommend the red food grade silicon material.

I will be ordering these parts in - and the parts are in.

(1) GB10708.3-89 - Dust Ring

(1) QRQR33- OR5334533 O-ring 53.34x5.33

or  2.1 X 0.209 53.34 MM X 5.33 MM o-ring pg 16 of 60  

or Newman #330 pg 8 - 53.34 x 5.33 - pg 8

(1) GB3452.1-85 - 73.5 x 3.55 - 2.874 X 0.137 73 MM X 3.5 MM o-ring pg 20 of 60 
or Newman #233 - 72.62 x 3.53 - pg 7

(1) GB9877.1-88 - seal Ultimate Industrial - UIS50x72x8ADL-NBR-SS

(1) GB3452.1-85 - 4.173 X 0.139 106 MM X 3.55 MM o-ring pg 24 of 60
or Newman #243 - 104.37 x 3.53 - pg 7

(1) GB894.1-86 - snap ring

(2) GB/T278-94 - 61911 sealed ball bearing

(2) QR41A- 3.149 X 0.208 80 MM X 5.3 MM o-ring pg 21-60
or Newman #338 - 78.74 x 5.33 - pg 8

Fill head Drawing